What FS means (lg fs error)
An lg fs error (Er FS) on an LG refrigerator indicates a freezer temperature sensor fault — the sensor that reports the freezer temperature is reading out of range. Without a trusted reading the control cannot manage freezer cooling accurately, so it raises FS.
Symptoms to look for
The signs below help confirm you are dealing with this condition rather than a different fault on your LG Refrigerator. You may see one of them or several together, and they can build up gradually or appear suddenly after a power event, a long door opening, or recent service.
- The display shows “FS” or “Er FS”
- The freezer runs too warm or too cold
- The displayed freezer temperature seems wrong
- Cooling control is inconsistent
Common causes
Several different faults can produce these symptoms. Working through the most likely causes in order helps separate a quick, owner-level check from a problem that needs trained service and the correct LG parts.
- Failed freezer sensor — the sensor reads out of range
- Wiring fault — the sensor connection is broken
- Connector corrosion — moisture has degraded the contact
- Control input fault — the board misreads the sensor
Troubleshooting steps you can try
Work through these checks in order before calling for service. Stop wherever you are unsure, or where high-voltage parts, gas, the sealed refrigeration system, or a heat-pump compressor are involved, and hand the rest to a qualified technician.
- Power the fridge off at the breaker for several minutes, then restore.
- Note whether the freezer is too warm or too cold with the code.
- Check stored food and move anything at risk if the freezer warmed.
- If FS persists, leave it for service to test the sensor.
Parts a technician may replace
Depending on what the diagnosis shows, a technician may inspect, test, or replace the freezer temperature sensor, sensor wiring, and control board. The correct part for your LG Refrigerator is matched from the model and serial number, and genuine LG components are fitted rather than generic substitutes so that performance, safety, and the appliance’s long working life are all protected. Confirming the failed part before ordering avoids replacing more than the fault actually requires.
When to call a technician
FS needs a technician to test the freezer temperature sensor and its wiring and replace the failed sensor. When the fix calls for trained service, book a visit through our scheduling page and an experienced, qualified technician will diagnose and repair it. For manufacturer documentation and model lookup, see the manufacturer at lg.com/us.
Prevention and care
Regular care keeps this condition from returning on your LG Refrigerator. Keep filters, vents, and the condenser or exhaust path clean, avoid overloading or blocking airflow, check that doors and seals close cleanly, and follow the LG maintenance guidance for your model. Because this unit relies on electronic control, protect it with a stable, correctly rated power supply and have any built-in or laundry installation done to LG specification so the control never sees an out-of-range condition. If a code appears, note exactly what was shown before you reset the appliance — that record helps the technician reach an accurate diagnosis and avoid replacing parts unnecessarily. Where stored food, a sealed refrigerant system, gas, or a safety lockout is involved, treat the condition as a reason to act quickly rather than wait.
Related help and LG resources
Browse other LG Refrigerator diagnostics, read about professional LG Refrigerator repair, look up your unit in the LG models reference, or the related rS fridge sensor fault, or schedule a service visit. For LG manufacturer documentation and model lookup, visit the manufacturer at lg.com/us.
