What F3 means (lg f3 error)
An lg f3 error on an LG range means a keypad key has been read as held down for more than about 60 seconds. The control interprets a continuously pressed key as a fault and shows F3, often simply because a key is sticky or the panel was wiped while a cycle ran.
Symptoms to look for
The signs below help confirm you are dealing with this condition rather than a different fault on your LG Range. You may see one of them or several together, and they can build up gradually or appear suddenly after a power event, a long door opening, or recent service.
- The display shows “F3”
- One or more oven keys do not respond
- A key feels stuck or sticky
- The fault may follow a cooktop spill or panel cleaning
Common causes
Several different faults can produce these symptoms. Working through the most likely causes in order helps separate a quick, owner-level check from a problem that needs trained service and the correct LG parts.
- Stuck key — debris or residue holds a key closed
- Shorted membrane — the keypad layer has shorted
- Ribbon connector fault — the keypad-to-board link is poor
- Control fault — the board misreads the key matrix
Troubleshooting steps you can try
Work through these checks in order before calling for service. Stop wherever you are unsure, or where high-voltage parts, gas, the sealed refrigeration system, or a heat-pump compressor are involved, and hand the rest to a qualified technician.
- Press Clear/Off, then switch the range breaker off for 30-60 seconds and restore.
- Clean and dry the control panel and clear any cooktop spatter.
- Lightly press each oven key in turn to free a sticking key.
- If F3 persists, leave it for service to test the keypad.
Parts a technician may replace
Depending on what the diagnosis shows, a technician may inspect, test, or replace the membrane keypad, keypad ribbon, and control board. The correct part for your LG Range is matched from the model and serial number, and genuine LG components are fitted rather than generic substitutes so that performance, safety, and the appliance’s long working life are all protected. Confirming the failed part before ordering avoids replacing more than the fault actually requires.
When to call a technician
A persistent F3 needs a technician to test the keypad and ribbon and replace the membrane keypad. When the fix calls for trained service, book a visit through our scheduling page and an experienced, qualified technician will diagnose and repair it. For manufacturer documentation and model lookup, see the manufacturer at lg.com/us.
Prevention and care
Regular care keeps this condition from returning on your LG Range. Keep filters, vents, and the condenser or exhaust path clean, avoid overloading or blocking airflow, check that doors and seals close cleanly, and follow the LG maintenance guidance for your model. Because this unit relies on electronic control, protect it with a stable, correctly rated power supply and have any built-in or laundry installation done to LG specification so the control never sees an out-of-range condition. If a code appears, note exactly what was shown before you reset the appliance — that record helps the technician reach an accurate diagnosis and avoid replacing parts unnecessarily.
Related help and LG resources
Browse other LG Range diagnostics, read about professional LG Range repair, look up your unit in the LG models reference, or the related F1 sensor fault, or schedule a service visit. For LG manufacturer documentation and model lookup, visit the manufacturer at lg.com/us.
