What F13 means (lg f13 error)
An lg f13 error on an LG microwave indicates an inverter over-current or voltage fault — the Smart Inverter that powers the magnetron has detected an electrical condition outside its safe range. The control raises F13 and stops the high-voltage circuit to protect the inverter and magnetron.
Symptoms to look for
The signs below help confirm you are dealing with this condition rather than a different fault on your LG Microwave. You may see one of them or several together, and they can build up gradually or appear suddenly after a power event, a long door opening, or recent service.
- The display shows “F13”
- The microwave will not heat
- Cooking stops shortly after starting
- The fault recurs after a reset
Common causes
Several different faults can produce these symptoms. Working through the most likely causes in order helps separate a quick, owner-level check from a problem that needs trained service and the correct LG parts.
- Inverter board fault — an over-current or voltage condition
- Magnetron fault — the tube loads the inverter abnormally
- High-voltage circuit fault — a related HV component failed
- Power surge damage — a spike stressed the inverter
Troubleshooting steps you can try
Work through these checks in order before calling for service. Stop wherever you are unsure, or where high-voltage parts, gas, the sealed refrigeration system, or a heat-pump compressor are involved, and hand the rest to a qualified technician.
- Unplug the microwave for two minutes, then restore.
- Confirm it is on its own correctly rated circuit, not a shared overloaded one.
- Do not open the cabinet — the high-voltage circuit stores a dangerous charge.
- Because the inverter and magnetron are involved, leave it for service if F13 returns.
Parts a technician may replace
Depending on what the diagnosis shows, a technician may inspect, test, or replace the smart inverter board, magnetron, high-voltage circuit, and control board. The correct part for your LG Microwave is matched from the model and serial number, and genuine LG components are fitted rather than generic substitutes so that performance, safety, and the appliance’s long working life are all protected. Confirming the failed part before ordering avoids replacing more than the fault actually requires.
When to call a technician
F13 needs a technician to safely test the inverter, magnetron, and high-voltage circuit and replace the failed part. When the fix calls for trained service, book a visit through our scheduling page and an experienced, qualified technician will diagnose and repair it. For manufacturer documentation and model lookup, see the manufacturer at lg.com/us.
Prevention and care
Regular care keeps this condition from returning on your LG Microwave. Keep filters, vents, and the condenser or exhaust path clean, avoid overloading or blocking airflow, check that doors and seals close cleanly, and follow the LG maintenance guidance for your model. Because this unit relies on electronic control, protect it with a stable, correctly rated power supply and have any built-in or laundry installation done to LG specification so the control never sees an out-of-range condition. If a code appears, note exactly what was shown before you reset the appliance — that record helps the technician reach an accurate diagnosis and avoid replacing parts unnecessarily. Where stored food, a sealed refrigerant system, gas, or a safety lockout is involved, treat the condition as a reason to act quickly rather than wait.
Related help and LG resources
Browse other LG Microwave diagnostics, read about professional LG Microwave repair, look up your unit in the LG models reference, or the related F11 inverter comms fault, or schedule a service visit. For LG manufacturer documentation and model lookup, visit the manufacturer at lg.com/us.
